Accessories & Upgrade Packages
Every OneCharge battery can feature a number of custom upgrades and accessories to meet specific clients’ needs. Each upgrade package will enable the battery to perform in various specialized applications.
Frost I & II
OneCharge FROST I & II batteries are solutions for working with products that must be stored in a refrigerated environment such as a cooler or freezer. OneCharge FROST batteries will maintain 95% of their rated capacity even at extremely low operating temperatures. Conventional batteries, when operating in such harsh conditions, lose 30-50% of their capacity and discharge quickly. The Thermostat Controlled FROST II option allows battery operation and charging at temperatures as low as–22F.
SEAL KIT TS1
The Seal kit TS1 upgrade is a solution for damp or dusty environments. TS1 will seal the cover, Battery Management System(BMS) and gauges from dust or light water spray and will help minimize sweating internally inside a cooler or freezer. Washing the battery and BMS is NOT recommended.
Controller Area Network (CAN)
CAN communication is a standard protocol used to allow Electronic Control Units (ECUs) to communicate in an efficient manner without a central computer. With this accessory, the BMS and the lift truck computer will talk to each other and share management of the overall safety of the equipment. The lift truck dashboard will display the current state of charge. The lift interrupt and creep speed will function normally. When a charger is plugged into the battery the forward and reverse functions will be disabled on the lift as well, to prevent drive off from the charger.
Battery Discharge Indicator (BDI)
The external BDI is a clone of the controls present on the face of the BMS on every OneCharge battery. This accessory serves as an intermediate solution when an operator cannot see the controls of the BMS from the driving position, or full CAN bus integration is not available. It is a wired connection and plugs into the top of the battery. The BDI is typically mounted in the driver’s view so the State of Charge level and Audible warnings can’t be missed.
Built-in Charger (BIC)
Some OneCharge batteries can be upgraded with a 110V, 56A output built-in charger. This accessory is typically used on small pallet jacks that travel inside of delivery trucks daily and where 480V, 3 phase charging is not possible. Opportunity charging is still recommended to optimize battery performance.
External Power Outlet
The external power outlet is a solution for applications that need to run accessories on the lift. Using this option, inventory equipment, scanners, and laptops can be connected directly to the OneCharge battery and the power to the accessory will remain on even if the lift truck is shut off. No more waiting to power up equipment every time you turn the key on/off.
Every OneCharge battery is engineered to meet or exceed the manufacturer’s minimum weight specification listed on the lift data plate. Depending on the application and the attachment in use, OneCharge can add the extra weight necessary to keep the counterbalance correct. You can add the extra weight when you place the order and in some cases, extra weight can be added later if you move a lift to a different application and switch attachments.